Color Semicircle Meters

This example demonstrates semicircle meters in various gradient colors, as well as various color scales and pointer types.

The background color in this example changes from a specified color at the border, to a brighter version of the color at the center. The brighter color is derived from the specified color using BaseChart.adjustBrightness. To achieve the radial gradient effect, these two colors are passed to AngularMeter.relativeRadialGradient to create a radial gradient color. The gradient color is then passed to AngularMeter.addScaleBackground to fill the background.

BaseMeter.addColorScale is used to create the color scales in this example. The color scales are created by with different colors, different end point positions and different widths at the end points.

Two pointer types are shown in these meters - a sharp very thin triangular pointer, and a line pointer. They are created using AngularMeter.addPointer2 with TriangularPointer2 and LinePointer2 as parameters.

[File: phpdemo/colorsemicirclemeter.php]

<?php
require_once("../lib/phpchartdir.php");

function createChart($viewer, $chartIndex)
{
    # The value to display on the meter
    $value = 72.55;

    # The background and border colors of the meters
    $bgColor = array(0x88ccff, 0xffdddd, 0xffddaa, 0xffccff, 0xdddddd, 0xccffcc);
    $borderColor = array(0x000077, 0x880000, 0xee6600, 0x440088, 0x000000, 0x006000);

    # Create an AngularMeter object of size 300 x 180 pixels with transparent background
    $m = new AngularMeter(300, 180, Transparent);

    # Center at (150, 150), scale radius = 124 pixels, scale angle -90 to +90 degrees
    $m->setMeter(150, 150, 124, -90, 90);

    # Background gradient color with brighter color at the center
    $bgGradient = array(0, $m->adjustBrightness($bgColor[$chartIndex], 3), 0.75, $bgColor[
        $chartIndex]);

    # Add a scale background of 148 pixels radius using the background gradient, with a 13 pixel
    # thick border
    $m->addScaleBackground(148, $m->relativeRadialGradient($bgGradient), 13, $borderColor[
        $chartIndex]);

    # Meter scale is 0 - 100, with major tick every 20 units, minor tick every 10 units, and micro
    # tick every 5 units
    $m->setScale(0, 100, 20, 10, 5);

    # Set the scale label style to 15pt Arial Italic. Set the major/minor/micro tick lengths to
    # 16/16/10 pixels pointing inwards, and their widths to 2/1/1 pixels.
    $m->setLabelStyle("Arial Italic", 16);
    $m->setTickLength(-16, -16, -10);
    $m->setLineWidth(0, 2, 1, 1);

    # Demostrate different types of color scales and putting them at different positions
    $smoothColorScale = array(0, 0x3333ff, 25, 0x0088ff, 50, 0x00ff00, 75, 0xdddd00, 100, 0xff0000);
    $stepColorScale = array(0, 0x00cc00, 60, 0xffdd00, 80, 0xee0000, 100);
    $highLowColorScale = array(0, 0x00ff00, 70, Transparent, 100, 0xff0000);

    if ($chartIndex == 0) {
        # Add the smooth color scale at the default position
        $m->addColorScale($smoothColorScale);
    } else if ($chartIndex == 1) {
        # Add the smooth color scale starting at radius 124 with zero width and ending at radius 124
        # with 16 pixels inner width
        $m->addColorScale($smoothColorScale, 124, 0, 124, -16);
    } else if ($chartIndex == 2) {
        # Add the smooth color scale starting at radius 65 with zero width and ending at radius 55
        # with 20 pixels outer width
        $m->addColorScale($smoothColorScale, 65, 0, 55, 20);
    } else if ($chartIndex == 3) {
        # Add the high/low color scale at the default position
        $m->addColorScale($highLowColorScale);
    } else if ($chartIndex == 4) {
        # Add the step color scale at the default position
        $m->addColorScale($stepColorScale);
    } else {
        # Add the smooth color scale at radius 55 with 20 pixels outer width
        $m->addColorScale($smoothColorScale, 55, 20);
    }

    # Add a text label centered at (150, 125) with 15pt Arial Italic font
    $m->addText(150, 125, "CPU", "Arial Italic", 15, TextColor, BottomCenter);

    # Demonstrate two different types of pointers - thin triangular pointer (the default) and line
    # pointer
    if ($chartIndex % 2 == 0) {
        $m->addPointer2($value, 0xff0000);
    } else {
        $m->addPointer2($value, 0xff0000, -1, LinePointer2);
    }

    # Output the chart
    $viewer->setChart($m, SVG);
}

# This example includes 6 charts
$viewers = array();
for ($i = 0; $i < 6; ++$i) {
    $viewers[$i] = new WebChartViewer("chart$i");
    createChart($viewers[$i], $i);
}
?>

<!DOCTYPE html>
<html>
<head>
    <title>Color Semicircle Meters</title>
    <!-- Include ChartDirector Javascript Library to support chart interactions -->
    <script type="text/javascript" src="cdjcv.js"></script>
</head>
<body style="margin:5px 0px 0px 5px">
    <div style="font:bold 18pt verdana;">
        Color Semicircle Meters
    </div>
    <hr style="border:solid 1px #000080; background:#000080" />
    <div style="font:10pt verdana; margin-bottom:1.5em">
        <a href="viewsource.php?file=<?=basename(__FILE__)?>">View Chart Source Code</a>
    </div>
    <!-- ****** Here are the chart images ****** -->
    <?php
        for ($i = 0; $i < count($viewers); ++$i) {
            echo $viewers[$i]->renderHTML(), " ";
        }
    ?>
</body>
</html>